Khởi động từ Schneider LC1D38E7 3P 38A 48VAC

1 Yêu thích
  • Mã: Khởi động từ Schneider LC1D38E7 3P 38A 48VAC
  • Xuất xứ: Schneider
  • Giá: 870.000 VNĐ
  • Mô tả:

    Khởi động từ Schneider LC1D38E7 3P 38A 48VAC

    Khởi động từ LC1D38E7

    Contactor Schneider LC1D38E7

    Contactor LC1D38E7

  • Ngày đăng:05-08-2021
  • Lượt xem: 241
Số lượng:

Khởi động từ Schneider LC1D38E7 3P 38A 48VAC

Main
range TeSys
product name TeSys D
product or component type Contactor
device short name LC1D
contactor application Motor control
Resistive load
utilisation category AC-1
AC-4
AC-3
poles description 3P
power pole contact composition 3 NO
[Ue] rated operational voltage Power circuit: <= 690 V AC 25...400 Hz
Power circuit: <= 300 V DC
[Ie] rated operational current 50 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
38 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
motor power kW 18.5 kW at 500 V AC 50/60 Hz (AC-3)
18.5 kW at 660...690 V AC 50/60 Hz (AC-3)
7.5 kW at 400 V AC 50/60 Hz (AC-4)
18.5 kW at 380...400 V AC 50/60 Hz (AC-3)
9 kW at 220...230 V AC 50/60 Hz (AC-3)
18.5 kW at 415...440 V AC 50/60 Hz (AC-3)
motor power HP (UL / CSA) 10 hp at 230/240 V AC 50/60 Hz for 3 phases motors
10 hp at 200/208 V AC 50/60 Hz for 3 phases motors
5 hp at 240 V AC 50/60 Hz for 1 phase motors
20 hp at 480 V AC 50/60 Hz for 3 phases motors
25 hp at 600 V AC 50/60 Hz for 3 phases motors
control circuit type AC at 50/60 Hz
[Uc] control circuit voltage 48 V AC 50/60 Hz
auxiliary contact composition 1 NO + 1 NC
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947
overvoltage category III
[Ith] conventional free air thermal current 10 A (at 60 °C) for signalling circuit
50 A (at 60 °C) for power circuit
Irms rated making capacity 140 A AC for signalling circuit conforming to IEC 60947-5-1
250 A DC for signalling circuit conforming to IEC 60947-5-1
550 A at 440 V for power circuit conforming to IEC 60947
rated breaking capacity 550 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current 60 A 40 °C - 10 min for power circuit
430 A 40 °C - 1 s for power circuit
150 A 40 °C - 1 min for power circuit
310 A 40 °C - 10 s for power circuit
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
associated fuse rating 10 A gG for signalling circuit conforming to IEC 60947-5-1
63 A gG at <= 690 V coordination type 1 for power circuit
63 A gG at <= 690 V coordination type 2 for power circuit
average impedance 2 mOhm - Ith 50 A 50 Hz for power circuit
[Ui] rated insulation voltage Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signalling circuit: 690 V conforming to IEC 60947-1
Signalling circuit: 600 V CSA certified
Signalling circuit: 600 V UL certified
Power circuit: 690 V conforming to IEC 60947-4-1
electrical durability 1.4 Mcycles 50 A AC-1 at Ue <= 440 V
1.4 Mcycles 38 A AC-3 at Ue <= 440 V
power dissipation per pole 5 W AC-1
3 W AC-3
Front cover With
mounting support Plate
Rail
standards CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
product certifications GOST
DNV
RINA
CCC
LROS (Lloyds register of shipping)
BV
GL
CSA
UL
connections - terminals Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5…10 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…10 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 1…10 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 1.5…6 mm²flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 1.5…10 mm²solid without cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…10 mm²solid without cable end
tightening torque Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2
operating time 4...19 ms opening
12...22 ms closing
safety reliability level B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
mechanical durability 15 Mcycles
maximum operating rate 3600 cyc/h 60 °C
Complementary
coil technology Without built-in suppressor module
control circuit voltage limits 0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz
0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz
0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz
1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
inrush power in VA 70 VA 60 Hz cos phi 0.75 (at 20 °C)
70 VA 50 Hz cos phi 0.75 (at 20 °C)
hold-in power consumption in VA 7.5 VA 60 Hz cos phi 0.3 (at 20 °C)
7 VA 50 Hz cos phi 0.3 (at 20 °C)
heat dissipation 2…3 W at 50/60 Hz
auxiliary contacts type Type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
type mirror contact 1 NC conforming to IEC 60947-4-1
signalling circuit frequency 25...400 Hz
minimum switching current 5 mA for signalling circuit
minimum switching voltage 17 V for signalling circuit
non-overlap time 1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact
insulation resistance > 10 MOhm for signalling circuit
Environment
IP degree of protection IP20 front face conforming to IEC 60529
protective treatment TH conforming to IEC 60068-2-30
pollution degree 3
ambient air temperature for operation -40…60 °C
60…70 °C with derating
ambient air temperature for storage -60…80 °C
operating altitude 0...3000 m
fire resistance 850 °C conforming to IEC 60695-2-1
flame retardance V1 conforming to UL 94
mechanical robustness Vibrations contactor open: 2 Gn, 5...300 Hz
Vibrations contactor closed: 4 Gn, 5...300 Hz
Shocks contactor closed: 15 Gn for 11 ms
Shocks contactor open: 8 Gn for 11 ms
height 85 mm
width 45 mm
depth 92 mm
net weight 0.38 kg

- Lựa chọn coil điện điều khiển cho khởi động từ Schneider theo các mã hàng :

Mã hàng

Diễn giải tên hàng

Coil điều khiển

LC1D38M7

Khởi động từ Schneider LC1D38M7 3P 38A

220VAC

LC1D38B7

Khởi động từ Schneider LC1D38B7 3P 38A

24VAC

LC1D38D7

Khởi động từ Schneider LC1D38D7 3P 38A

42VAC

LC1D38E7

Khởi động từ Schneider LC1D38E7 3P 38A

48VAC

LC1D38F7

Khởi động từ Schneider LC1D38F7 3P 38A

110VAC

LC1D38P7

Khởi động từ Schneider LC1D38P7 3P 38A

230VAC

LC1D38U7

Khởi động từ Schneider LC1D38U7 3P 38A

240VAC

LC1D38Q7

Khởi động từ Schneider LC1D38Q7 3P 38A

380VAC

LC1D38N7

Khởi động từ Schneider LC1D38N7 3P 38A

415VAC

LC1D38R7

Khởi động từ Schneider LC1D38R7 3P 38A

440VAC

LC1D38BD

Khởi động từ Schneider LC1D38BD 3P 38A

24VDC

LC1D38ED

Khởi động từ Schneider LC1D38ED 3P 38A

48VDC

LC1D38FD

Khởi động từ Schneider LC1D38FD 3P 38A

110VDC

LC1D38MD

Khởi động từ Schneider LC1D38MD 3P 38A

220VDC


- Hướng dẫn lựa chọn Coil cho khởi động từ Schneider :


- Kích thước khởi động từ LC1D38E7 : 


- Bảng giá khởi động từ Schneider xem tại đây.

- Bảng giá contactor Schneider xem tại đây.


- Bảng hướng dẫn lựa chọn rơ le nhiệt cho khởi động từ Schneider LC1D38E7 xem tại đây.


 

 

Hủy

Sản phẩm cùng loại

Danh mục sản phẩm

Cart 0Giỏ hàng zalo whatsapp Sản phẩm yêu thích
Yêu thích